About Wire Rope Inspection Services
The MRT Inspection of wire ropes with the use of our equipment detect defects which might not be identified by visual inspection alone.
Wire Ropes Inspection Services with the use of the MRT Equipment can detect, localize and evaluate the defects in all cross section area such as: broken wires, corrosion, wear & tear etc..
Regular Wire Ropes Inspection according to with MRT procedure and international standards in cooperation with OEM contributes to:
- Increase safety
- Maintaining production continuity
- Scheduling rope changes according to wear & tear
- Increased the lifetime of ropes
- Increased savings
Wire Rope Inspection are performed by a person competent in the operation of MRT equipment and interpretation of trace data.
Perceivestar provides expertise with recommendations regarding further utilization of wire ropes.
Cable -Stayed Bridge Wire rope Inspection services
The suspension cables or prestressed tendons are very important elements of the bridges. They most commonly work in cyclically variable hard load conditions in a corrosive environment etc. For this reason cables are subject of faster wear and tear than other parts.
Their technical condition has a major influence on the continuous failure-free operation, and above all the safety of people using the bridge. Therefore a very the most important issue is an efficient assessment method of cables operating safety.
Bridge Inspection Services with the use of MRT equipment allows to get information about the technical condition of the cables, and detects the weakness section of cables. Moreover the regularly Bridge Inspection in order to detect broken wires, and corrosion or other damages in good time.
The Bridge Inspection Services can be performed with the use of pulling system or with the use of special designed Crawler System. The Crawler System is designed to winch up the MRT device on the top of the tested object.
The inspection of the technical condition of cableway wire ropes with the use of MRT System enables to detect of the most common various of wire rope wear, such as: external broken wires or abrasions.
MRT Equipment – Measuring Head for Cableway Inspection Services is equipped in two different types of sensors:
- LF sensor, that enables the localization and evaluation of local defects,
- LMA sensor, that enables the localization and evaluation of long changes of metallic cross section area in a tested rope.
Due to use this two types of sensors in our Diagnostic System, it is possible to perform accurate diagnostics of the place of strands rope, with detection of local defects and rope deformation in the place where the strands are interlaced (broken and loosened external wires, flattened external strands).
The advantages of Cableway Inspection Services with the use of our Diagnostic System:
- Reduced time of wire rope inspection compared to the visual inspection while maintaining reliability to detect all local external defects,
- Maintenance a high level of safety of transported persons due to possibility of detect the weakest section of wire rope,
- Guarantee of detecting all discontinuities in the wire rope cross section along with deformations and distortions.
Our OEM Laboratory LRM-NDE manufactures special designed measuring head for inspection of carrying ropes.
The LRM®XXI Diagnostic Systems completely fulfils the requirements of standard EN 12927:2019
